mlyle At the moment I only have the RevoAcro all wired up with SBUS to Main port RX and S.Port to Flexi port TX using an unhacked XSR.
Should I be expecting the S.Port to just work without any external inverters or hacks when using the Artifacts build??
I gave it an honest try, but no matter what I do, the Artifacts GCS will not talk to the RevoAcro I'm trying to test this on. I can flash the
fw_revolution.tlfw and get into the bootloader. If I downgrade to the Release-20170213 GCS then I can connect, but cannot configure.
FWIW, Release-20170213 works fine with this same RevoAcro
Another note: the Artifacts GCS works fine with the 20x20mm RevoAcro that I got from BG. I don't have that one wired up to test though.