Installed dRonin on my Bicopter today and have detected 1 motor, 2 Servos.
Hardware... Using the default wiring from the FCHUB and ribbon cable for the FC interconnection.
Emax LS2207-2550kv Motors
One thing I've noticed right off in your Output tab is how your channels are grouped. Specifically, Channel 1 on my setup is singular, while your setup (your photos from prior posts) show Channels 1-2 grouped.
Any ideas on how i can alter this as i don't see the options under the Tabs nor under the "System" settings.
Side Note: Flew this beast several times using Betaflight so i know the attached hardware works.