Ive got an original FPV Brain FC. Thought it was about time to put it to use.
Changed over from Tau Labs and working my way through the initial setup of a quad,
I've got a Ublox M8N based GPS and Compass is an L883 chip.
GPS is working although on V2 firmware. The I2C mag only works rarely but I have had the red line once or twice.
Fiddling with the config I disabled the USB. My bad!
The FC makes the Windows USB disconnect sound every 1.5 seconds.
The red LED on the FC is off for the first time.
The blue LED comes on bright goes dim the flashes bright before going off in sync with the USB disconnect.
Rescue finds the FC but reloads the USB setting.
Safe boot does the same.
Boot pins do the same as well.
Can I hold F8 and get a settings delete or a flash delete or something?
Any ideas on the magnetometer? I'm powering the GPS/Mag combo from the RX UART port so only SDA and SCL are used on the Flx port. I connect battery first etc.
Any help would be appreciated.